www.telecom.fr

 
MATERIELS OPERATEURS TELECOM ET INSTALLATEURS : FIBRE OPTIQUE - TELECOM ET RESEAUX - MOTOROLA - PABX - ELECTRICTE HT....


MULHOUSE FRANCE
 

 
 
RACCORDS OPTIQUES

SC-SC PATCHCORD

ST-ST PATCHCORD

LC-LC PATCHCORD

MTRJ-MTRJ PATCHCORD

PRODUCT TYPE : OPTICAL FIBER PATCH CORD
SPECIFICATION : ANSI /TIA/EIA – 568 – B.3 ve IEC 60874
APPLICATION : Fiber Patch Cords are interconnection cables (between two fixed cables, devices or between a device and a cable) that are formed by the assemblie of two of the connector types such as ST, SC, LC, FC and MTRJ with a Tight Buffered Patch Cables / ZipCords in different configurations. SIPTEL patch Cords, with Standard lengths between 1 to 10Mt (Non-Standard lengths are available upon request), are manufactured by using both G.652 & G.655 Single Mode and 62.5/125 & 50/125 (OM2 & OM3) Multi Mode Fibers. Simplex and Duplex types of all SIPTEL Patch Cords types are also produced for different requirements and needs.
CONSTRUCTION : Construction: 1. Fiber Optic Core 2. 900 µm Buffer Tube 3. Aramide Yarn for Tensile Strength 4. LS0H Outer Sheath (Yellow for SM, Orange for MM, Blue or Violet for OM3) 5. Fiber Connectors

 

 

 

 

 

Applications:

  1. Fiber Patch Panels & Optical Distribution Frames
  2. Fiber Cross Connections
  3. Fiber Active Equipment Connections
  4. Fiber to the Home and to the Desk Connections

Attenuation (db/km)

Single Mode 1310 / 1550 : 0.38 / 0.24
Multi Mode 850 / 1300 : 2.8 / 0.8
Band With (mhz/km)
Multi Mode 62.5/ 125 - 850/1300 : 200 / 500
Multi Mode 50/125 - 850 / 1300 : 500 / 500
Multi Mode OM3 - 850 /1300 : 1500 / 500
(Singlemode)
Insertion Loss : Max. 0.3 dB Typical 0.2 dB
Return Loss : UPC > 50dB, APC >60dB
(Multimode)
Insertion Loss : Max. 0.3 dB Typical 0.2 dB
(MT-RJ)
Insertion Loss : Max. 0.5 dB
Operating Temperature : -40°C to +85°C
Uyumluluk
Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 874-14

PRODUCT TYPE : SC-SC PATCHCORD
SPECIFICATION : ANSI /TIA/EIA – 568 – B.3
APPLICATION : - Fiber Patch Panels & Optical Distribution Frames
- Fiber Cross Connections
- Fiber Active Equipment Connections
- Fiber to the Home and to the Desk Connections
 
CONSTRUCTION : Fiber Patch Cords are interconnection cables (between two fixed cables, devices or between a device and a cable) that are formed by the assemblie of two of the connector types such as SC with a Tight Buffered Patch Cables / ZipCords in different configurations. SIPTEL patch Cords, with Standard lengths between 1 to 10Mt (Non-Standard lengths are available upon request), are manufactured by using both G.652 & G.655 Single Mode and 62.5/125 & 50/125 (OM2 & OM3) Multi Mode Fibers. Simplex and Duplex types of all SIPTEL Patch Cords types are also produced for different requirements and needs.

Attenuation (dB /km)

 

Single Mode 1310 / 1550

0.38 / 0.24

Multi Mode 850/1300

2.8 / 0.8

Band Width (mhz/km)

 

Multi Mode 62.5/ 125 - 850/1300

500 / 500

Multi Mode 50/125 - 850 / 1300

500 / 500

Multi Mode OM3 - 850 /1300

1500 / 500

 

TECHNICAL DATA:

 

Optical Performance

 

Single Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

Return Loss

UPC > 50dB, APC >60dB

Multi Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

MT-RJ

 

Insertion loss

Max. 0.5 dB

Environmental

 

Temparature Cycling (IEC874-1)

-40°C / +75°C (40 cycles 0,2dB change)

High temparature (IEC 874-1)

+75°C (96 hours 0,2dB change)

Damp heat (IEC 874-1)

%95 RH için +60°C (96 hours 0,2dB change)

Vibration (mated pair IEC 874-1)

10-55Hz (1,5mm P to P 0,3dB change)

Mating durability (IEC 874-1)

1000 mating cycles (Every 25 cycles 0,2dB change)

Operating Temperature

-40°C / +85°C

Intermateability (IEC 874-1)

Optically and mechanically equivalent with all connectors

PRODUCT TYPE : ST-ST PATCHCORD
SPECIFICATION : ANSI /TIA/EIA – 568 – B.3
APPLICATION : - Fiber Patch Panels & Optical Distribution Frames
- Fiber Cross Connections
- Fiber Active Equipment Connections
- Fiber to the Home and to the Desk Connections
 
CONSTRUCTION : Fiber Patch Cords are interconnection cables (between two fixed cables, devices or between a device and a cable) that are formed by the assemblie of two of the connector types such as ST with a Tight Buffered Patch Cables / ZipCords in different configurations. SIPTEL patch Cords, with Standard lengths between 1 to 10Mt (Non-Standard lengths are available upon request), are manufactured by using both G.652 & G.655 Single Mode and 62.5/125 & 50/125 (OM2 & OM3) Multi Mode Fibers. Simplex and Duplex types of all SIPTEL Patch Cords types are also produced for different requirements and needs.

 

Attenuation (dB /km)

 

Single Mode 1310 / 1550

0.38 / 0.24

Multi Mode 850/1300

2.8 / 0.8

Band Width (mhz/km)

 

Multi Mode 62.5/ 125 - 850/1300

500 / 500

Multi Mode 50/125 - 850 / 1300

500 / 500

Multi Mode OM3 - 850 /1300

1500 / 500

 

Optical Performance

 

Single Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

Return Loss

UPC > 50dB, APC >60dB

Multi Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

MT-RJ

 

Insertion loss

Max. 0.5 dB

Environmental

 

Temparature Cycling (IEC874-1)

-40°C / +75°C (40 cycles 0,2dB change)

High temparature (IEC 874-1)

+75°C (96 hours 0,2dB change)

Damp heat (IEC 874-1)

%95 RH için +60°C (96 hours 0,2dB change)

Vibration (mated pair IEC 874-1)

10-55Hz (1,5mm P to P 0,3dB change)

Mating durability (IEC 874-1)

1000 mating cycles (Every 25 cycles 0,2dB change)

Operating Temperature

-40°C / +85°C

Intermateability (IEC 874-1)

Optically and mechanically equivalent with all connectors

PRODUCT TYPE : LC-LC PATCHCORD
SPECIFICATION : ANSI /TIA/EIA – 568 – B.3
APPLICATION : - Fiber Patch Panels & Optical Distribution Frames
- Fiber Cross Connections
- Fiber Active Equipment Connections
- Fiber to the Home and to the Desk Connections
 
CONSTRUCTION : Fiber Patch Cords are interconnection cables (between two fixed cables, devices or between a device and a cable) that are formed by the assemblie of two of the connector types such as LC with a Tight Buffered Patch Cables / ZipCords in different configurations. SIPTEL patch Cords, with Standard lengths between 1 to 10Mt (Non-Standard lengths are available upon request), are manufactured by using both G.652 & G.655 Single Mode and 62.5/125 & 50/125 (OM2 & OM3) Multi Mode Fibers. Simplex and Duplex types of all SIPTEL Patch Cords types are also produced for different requirements and needs.

Attenuation (dB /km)

 

Single Mode 1310 / 1550

0.38 / 0.24

Multi Mode 850/1300

2.8 / 0.8

Band Width (mhz/km)

 

Multi Mode 62.5/ 125 - 850/1300

500 / 500

Multi Mode 50/125 - 850 / 1300

500 / 500

Multi Mode OM3 - 850 /1300

1500 / 500

 

Optical Performance

 

Single Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

Return Loss

UPC > 50dB, APC >60dB

Multi Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

MT-RJ

 

Insertion loss

Max. 0.5 dB

Environmental

 

Temparature Cycling (IEC874-1)

-40°C / +75°C (40 cycles 0,2dB change)

High temparature (IEC 874-1)

+75°C (96 hours 0,2dB change)

Damp heat (IEC 874-1)

%95 RH için +60°C (96 hours 0,2dB change)

Vibration (mated pair IEC 874-1)

10-55Hz (1,5mm P to P 0,3dB change)

Mating durability (IEC 874-1)

1000 mating cycles (Every 25 cycles 0,2dB change)

Operating Temperature

-40°C / +85°C

Intermateability (IEC 874-1)

Optically and mechanically equivalent with all connectors

PRODUCT TYPE : MT-RJ/ MT-RJ PATCHCORD
SPECIFICATION : ANSI /TIA/EIA – 568 – B.3
APPLICATION : - Fiber Patch Panels & Optical Distribution Frames
- Fiber Cross Connections
- Fiber Active Equipment Connections
- Fiber to the Home and to the Desk Connections
 
CONSTRUCTION : Fiber Patch Cords are interconnection cables (between two fixed cables, devices or between a device and a cable) that are formed by the assemblie of two of the connector types such as MT-RJ with a Tight Buffered Patch Cables / ZipCords in different configurations. SIPTEL patch Cords, with Standard lengths between 1 to 10Mt (Non-Standard lengths are available upon request), are manufactured by using both G.652 & G.655 Single Mode and 62.5/125 & 50/125 (OM2 & OM3) Multi Mode Fibers. Simplex and Duplex types of all SIPTEL Patch Cords types are also produced for different requirements and needs.

Attenuation (dB /km)

 

Single Mode 1310 / 1550

0.38 / 0.24

Multi Mode 850/1300

2.8 / 0.8

Band Width (mhz/km)

 

Multi Mode 62.5/ 125 - 850/1300

500 / 500

Multi Mode 50/125 - 850 / 1300

500 / 500

Multi Mode OM3 - 850 /1300

1500 / 500

 

Optical Performance

 

Single Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

Return Loss

UPC > 50dB, APC >60dB

Multi Mode

 

Insertion loss

Max. 0.3 dB – Typical 0.2 dB

MT-RJ

 

Insertion loss

Max. 0.5 dB

Environmental

 

Temparature Cycling (IEC874-1)

-40°C / +75°C (40 cycles 0,2dB change)

High temparature (IEC 874-1)

+75°C (96 hours 0,2dB change)

Damp heat (IEC 874-1)

%95 RH için +60°C (96 hours 0,2dB change)

Vibration (mated pair IEC 874-1)

10-55Hz (1,5mm P to P 0,3dB change)

Mating durability (IEC 874-1)

1000 mating cycles (Every 25 cycles 0,2dB change)

Operating Temperature

-40°C / +85°C

Intermateability (IEC 874-1)

Optically and mechanically equivalent with all connectors

 

© 2011 SIPTEL™ Tous droits réservés

Accueil - Groupe - Mentions légales - Confidentialité - Recrutement - Références - Contact